• <nav id="mm0wu"></nav>
    <nav id="mm0wu"></nav>
  • 快思聰音頻處理器C2N-VEQ4

    產品描述:

    1.png




    Audio

    Features 4x4 Matrix Mixer, 4-Channel Digital Audio Processor

    Master Volume -80dB to +20dB, 0.1dB steps (balanced I/O)

    Channel Volume -80dB to +12dB, 0.1dB steps from Media Tools; -80dB to +0dB, 0.1dB steps from SIMPL (balanced I/O)

    Mute > -100dB

    Bass/Treble Gain Range ±15dB, 0.5dB steps

    Equalization Modes 10-band graphic plus 2-band parametric; 5-band graphic plus 7-band parametric; speech-optimized 5-band graphic plus 7-band parametric; 3-band graphic plus 9-band parametric; or 12-band parametric

    PEQ Filter Gain ±12dB, 0.1dB steps from Media Tools; +24/-36dB, 0.1dB steps from SIMPL

    PEQ Filter Bandwidth 0.02 to 2.0 octaves (1.0 to 3.0 for shelving) from Media Tools; 0.02 to 3.5 from SIMPL

    PEQ Filter Center Frequency 25Hz to 19.9kHz from Media Tools; 5Hz to 24KHz from SIMPL

    PEQ Filter Types low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf

    GEQ Filter Gain +5/-10dB, 0.1dB steps from Media Tools; ±10dB, 0.1dB steps from SIMPL

    GEQ Filter Center Frequencies 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz (10-band); 63, 250, 1k, 4k, 10k Hz (5-band); 160, 600, 1k, 2.5k, 5k Hz (Speech Opt. 5-band); 250, 1k, 4k Hz (3-band)

    Frequency Response ±0.1dB 20Hz to 22kHz, ±0.5dB 10Hz to 30kHz

    Total Harmonic Distortion (THD) + Noise <0.008% @1kHz

    S/N Ratio >97dB balanced, >95dB unbalanced, 20Hz to 22kHz A-weighted

    Crosstalk > -90dB 20Hz to 22kHz

    Common Mode Rejection >90dB 20Hz to 22kHz
    Connectors

    IN 1 - 4 (2) 5-pin 3.5mm detachable terminal blocks comprising (4) balanced/unbalanced line-level audio inputs;
    Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
    Input Impedance: 10k ohms balanced, 5k ohm unbalanced

    OUT 1 - 4 (2) 5-pin 3.5mm detachable terminal blocks comprising (4) balanced/unbalanced line-level audio outputs;
    Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
    Output Impedance: 200 ohms balanced, 100 ohms unbalanced

    NET (1) 4-pin 5mm detachable terminal block, Cresnet slave port;
    Connects to Cresnet control network

    G (1) 6-32 screw, chassis ground lug
    Indicators

    PWR (green) Indicates 24 Volts DC power supplied from Cresnet control network

    NET (yellow) Indicates communication with Cresnet system

    ACTIVITY 1 – 4 (red) Illuminates when a parameter is being changed on a given channel

    SETUP (rear) (red) Used for Touch-Settable ID (TSID)
    Buttons

    SETUP (rear) Used for Touch-Settable ID (TSID)
    Power Requirements

    Cresnet Power Usage 8 Watts (0.34 Amps @ 24 Volts DC)
    Environmental

    Temperature 32° to 122°F (0° to 50°C)

    Humidity 10% to 90% RH (non-condensing)
    Enclosure

    Chassis Steel, black matte powder coat finish

    Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay

    Mounting Freestanding or 0.5U 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit sold separately)
    Dimensions

    Height 1.80 in (4.57 cm);
    1.70 in (4.32 cm) without feet

    Width 7.07 in (17.96 cm)

    Depth 6.38 in (16.21 cm)
    Weight

    1.86 lb (0.84 kg)


    Audio

    Features 4x4 Matrix Mixer, 4-Channel Digital Audio Processor

    Master Volume -80dB to +20dB, 0.1dB steps (balanced I/O)

    Channel Volume -80dB to +12dB, 0.1dB steps from Media Tools; -80dB to +0dB, 0.1dB steps from SIMPL (balanced I/O)

    Mute > -100dB

    Bass/Treble Gain Range ±15dB, 0.5dB steps

    Equalization Modes 10-band graphic plus 2-band parametric; 5-band graphic plus 7-band parametric; speech-optimized 5-band graphic plus 7-band parametric; 3-band graphic plus 9-band parametric; or 12-band parametric

    PEQ Filter Gain ±12dB, 0.1dB steps from Media Tools; +24/-36dB, 0.1dB steps from SIMPL

    PEQ Filter Bandwidth 0.02 to 2.0 octaves (1.0 to 3.0 for shelving) from Media Tools; 0.02 to 3.5 from SIMPL

    PEQ Filter Center Frequency 25Hz to 19.9kHz from Media Tools; 5Hz to 24KHz from SIMPL

    PEQ Filter Types low pass, high pass, EQ filter (peaking/notching), bass shelf, and treble shelf

    GEQ Filter Gain +5/-10dB, 0.1dB steps from Media Tools; ±10dB, 0.1dB steps from SIMPL

    GEQ Filter Center Frequencies 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz (10-band); 63, 250, 1k, 4k, 10k Hz (5-band); 160, 600, 1k, 2.5k, 5k Hz (Speech Opt. 5-band); 250, 1k, 4k Hz (3-band)

    Frequency Response ±0.1dB 20Hz to 22kHz, ±0.5dB 10Hz to 30kHz

    Total Harmonic Distortion (THD) + Noise <0.008% @1kHz

    S/N Ratio >97dB balanced, >95dB unbalanced, 20Hz to 22kHz A-weighted

    Crosstalk > -90dB 20Hz to 22kHz

    Common Mode Rejection >90dB 20Hz to 22kHz
    Connectors

    IN 1 - 4 (2) 5-pin 3.5mm detachable terminal blocks comprising (4) balanced/unbalanced line-level audio inputs;
    Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
    Input Impedance: 10k ohms balanced, 5k ohm unbalanced

    OUT 1 - 4 (2) 5-pin 3.5mm detachable terminal blocks comprising (4) balanced/unbalanced line-level audio outputs;
    Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
    Output Impedance: 200 ohms balanced, 100 ohms unbalanced

    NET (1) 4-pin 5mm detachable terminal block, Cresnet slave port;
    Connects to Cresnet control network

    G (1) 6-32 screw, chassis ground lug
    Indicators

    PWR (green) Indicates 24 Volts DC power supplied from Cresnet control network

    NET (yellow) Indicates communication with Cresnet system

    ACTIVITY 1 – 4 (red) Illuminates when a parameter is being changed on a given channel

    SETUP (rear) (red) Used for Touch-Settable ID (TSID)
    Buttons

    SETUP (rear) Used for Touch-Settable ID (TSID)
    Power Requirements

    Cresnet Power Usage 8 Watts (0.34 Amps @ 24 Volts DC)
    Environmental

    Temperature 32° to 122°F (0° to 50°C)

    Humidity 10% to 90% RH (non-condensing)
    Enclosure

    Chassis Steel, black matte powder coat finish

    Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay

    Mounting Freestanding or 0.5U 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit sold separately)
    Dimensions

    Height 1.80 in (4.57 cm);
    1.70 in (4.32 cm) without feet

    Width 7.07 in (17.96 cm)

    Depth 6.38 in (16.21 cm)
    Weight

    1.86 lb (0.84 kg)

    展開
    唯彩会